Snap Manifold
Snap Manifold
f100 header clearence?
i have a 1976 ford f100 and i want to get headers instead of manifolds, the only shorty headers cost 600 dollars, so would i have trouble putting in full length headers, ive heard i ma have to pull the engine for it to fit, and also, the nuts holding on the headers are rusty, will i have a problem with possibly snapping a bolt or something? and what should i put on the nuts before i go to take off the manifolds? its a 33 year old new england truck and the manifold nuts have never beed touched, thanks for all the help.
most of the time you can unbolt the motor mounts and lift the motor a little to slide the headers in from the bottom should be no problem with clearance i had a 460 in a 75 f100 with long tube headers no problem soak all the bolts with PB BLASTER better than any other my opinion may have to turn the bolt back and forth a few times till you get em out
 |
 Blue Point by snap on Exhaust Manifold Socket Set  US $33.24
|
 Snap On Snapon A C Manifold Hoses Guages Charging Refrigerant R 12 R 22 R 502 US $23.99
|
| Powered by phpBay Pro |
97 Dodge 5.2L intake leak captured with Snap-on Borescope and smoke machine in the intake manifold
Leave a Reply
You must be logged in to post a comment.