Purpose Oil

Purpose Oil
Purpose Oil Purpose Oil

Change Your Boat's Oil Efficiently and Reduce the Threat to the Marine Environment!

To prolong the life of the boat, most boat owners go through the tedious task of changing the oil and filter at least once a year. But, changing the boat's oil can be one of the most daunting tasks for any boat owner as there are possibilities of accidental oil spills, which in turn contribute to marine pollution and lead to Coast Guard fines. To avoid such situations, efficient methods for changing boat oil have to be adopted.

Here are some useful steps that you can follow while changing boat oil:

•Let your boat's engine run until it gets warmed up to 130 degrees. By doing so, the oil will be loosened from the engine. As a result, the oil will no longer be thick and will flow freely and also drain better.

•Open the oil plug and use an oil pump to drain the old oil into the catch pan. It is recommended that you go for oil pumps so that you can reach the oil plugs of inboard engines with ease.

•Once the old oil gets drained completely, proceed with changing the oil filter. Take extra care while changing the filter since there might be possible oil spills when it is unscrewed. To avoid such spills, a plastic bag can be fastened to the filter.

•Replace the oil plug and fill the oil receptacle with the appropriate amount of oil. Using a funnel for filling purpose can reduce oil spills to a great extent.

•Cleanup the oil spills and drips immediately using only eco-friendly oil spill cleaners. You can use Oil Gone Easy S-200 for effective oil spill cleanup as it works using bioremediation technology.

•Make sure that the oil does not seep into your boat's bilge tank as letting out oily bilge water into the sea can get you heavy Coast Guard fines.

•Run the engine for few minutes and most importantly dispose the old oil properly.

About the Author

For more details about Changing boat oil and Oil Spills visit our site oilgoneeasy.

What is the purpose of key oil for a clarinet?

I got this maintenance kit for my clarinet, and it came with key oil. What is the purpose, and how do you put it on? Also, how do you make the keys shiny again? Some of the keys aren't that shiny and I want to make them shiny. Thanks to everyone who answers!

The key oil is to make the key action better.

You shouldn't have to use this often, and if you do, then you should take your clarinet in for maintenance- it means there is something grinding that shouldn't be.

If a key is moving slow or takes more pressure than usual, you can use a jeweler's screwdriver and TOOTHLESS pliers to pull out the pin, put ONE drop of oil on it, and put it back in. Don't ever force a screw or a pin- if it gets stuck, pull it out and try again.

Also, you can use valve oil (like for a trumpet, trombone, etc)... but I prefer sewing maching oil- it's got a higher viscosity and lasts longer. Also, sewing machine oil doesn't become sticky over time- key and valve oil will.

Usually, your keys are oiled during general maintenance by a tech whenever you take your clarinet to be repadded, cleaned, or keys adjusted. If you aren't comfortable doing your own maintenance, take it to a shop. Try to get a "check-up" about once every year- like a car, it's actually cheaper to have annual maintenance than to wait for something to go wrong.

Anyways, hope this helped!