Meter Gage
Meter Gage
help tuning a carb? my engine has a big cam in it!?
i have a 70 chevy truck, it has a 383/700r4 with a big cam! i can seem to tune the idle cuz it has a big lobe
so the meter goes up and down making it hard to find the highest point and the Gage!
how do you tune a engine that has a big cam in it?
You have to idle it up enough so the engine runs smooth. Try 1500 rpms. Make sure with your added cam, it might need to idle at a higher rpm anyway. If it's a standard carb, then set the idle screw. An additional means is to use or install a stoich meter to determine proper air-fuel ratio. But big cams will not idle smooth anyway -they tend to "lope". They also have a tendency of creating a loss of vacuum in your system, which can lower your brake performance and cause some other issues. That can be fixed with an auxiliary vacuum pump.
 |
 Omega DP41 S Strain Gage Meter  US $129.99
|
 Set of 5 AUTO METER gages RPMWATEROILNITROSVOLTS US $150.00
|
 Dwyer VFC 143 Flow Meter Flowmeter Gage Gauge US $.99
|
 Vintage GC Presision DC Amperes Meter Gage MOC LK US $7.99
|
 Vintage GC Presision AC Volt Meter Gage MOC LK US $7.99
|
 Vintage Universal Enterprises DC Ohms Meter Gage Model M 110 LK US $7.99
|
 AUTOMETER BLACK FACE 3 GAUGE CONSOLE OIL PRESSURE WATER US $68.99
|
 Carbon Monoxide meterCO gas meterdetectortestergage US $190.50
|
 2 Indicator light 12 Voltstruckrvdash light 05GR US $13.07
|
 NEW NO NAME CONVERTER OIL TEMP temperature METER GAUGE GAGE US $20.00
|
 Cistern Tank Low Level Water Meter Gage Gauge l US $49.99
|
 Tensitron Fine Wire Filament Tension Gage Meter 0 4000 gram US $292.50
|
 JOHN DEERE 212 214 300 LAWN TRACTOR AMP METER GAGE US $20.00
|
| Powered by phpBay Pro |
Best Paint Thickness Gauge & Coating Thickness Meter
Leave a Reply
You must be logged in to post a comment.