Metal Hvlp
Metal Hvlp

Can I use my air compressor and a spray gun for the following paint jobs?
All interior work:
I want to prime and latex paint some walls.
I also want to finish oil painting the basement cement floor.
The air compressor is an oiless 8 gallon 150 psi electric model
It easily powers an impact gun
has a regulator knob and two gauges.
The primer is the thickest of the liquids which I want to spray.
I got a HVLP Spray Gun
It has a 2.0 mm tip, All metal construction, and Brass Fan Nozzle with one quart dripless cup. Runs at 20 to 45 psi with 1/4 nps inlet. It has a Air Control, Spray Control, and Fluid Control for making adjustments.
Any advice is appreciated.
The HVLP is the way to go and I would keep the psi down to 30 or so to control the overspray. I also think that your 8 gallon tank is sufficient. It might work the compressor a little overtime because of the constaint drain of the sprayer, but for a one time deal I think will be fine.
I'd do it. Good luck.
![]() |
![]() Sprayfine metal HVLP turbine gravity feed spray gun US $139.99
|
![]() Sprayfine all metal HVLP turbine spray gun w 1 qt cup US $139.99
|
![]() Neiko 15mm HVLP Air Spray Gun Gun Metal Finish US $50.31
|
![]() New 20mm HVLP SPRAY GUN Auto Paint Primer Metal Flake US $41.99
|
![]() Ocean Blue sparkle metal flakes House of Kolors HVLP US $9.99
|
![]() ProForge HVLP Air Spray Paint Gun Gauge w Metal Cup US $53.48
|
![]() Ocean Blue sparkle metal flakes House of Kolors HVLP Single Stagle Auto Paint US $9.99
|
![]() DeVILBISS HVLP SPRAY GUN w 18 22 Tips Auto Paint Primer Priming Metal Flake US $139.99
|
| Powered by phpBay Pro |
Lemmer HVLP Turbine System
Leave a Reply
You must be logged in to post a comment.


US $39.90






















