Inspection Reset
Inspection Reset
How can I get my OBD monitors in my car to pass smog inspection?
I had taken my car to get a smog check and everything passed except for the OBD monitor test. I not exactly sure what this is, but they said that all I needed to do was to drive the car for a few days and then the monitor would reset itself. I have been driving it for over two months, and it still will not pass. What can I do? Is there another way around this?
A good mechanic still needs to fix something on your car that is setting it off. I have no clue from here.
What an OBD Monitor is:
The On-Board Diagnostic system keeps tabs on a vehicle’s performance through the use of “Monitors.” A monitor is a specific type of test that the OBDII system performs on a certain component or subsystem of the vehicle. There are two types of monitors:
Continuous: These monitors run all the time as long as the key is turned on and/or the engine is running. There are three continuous monitors that every OBDII equipped vehicle has, they are the Comprehensive Component Monitor, The Fuel Monitor and the Misfire Monitor.
Non-Continuous: These monitors require certain conditions such as speed, acceleration/deceleration, fuel level, ambient and other conditions to be met in order for the monitor to run its testing sequence. If the specific conditions are not met, then the monitor will not perform its tests and cannot report as to whether or not there are any problems. Non-continuous monitors include the Catalyst, Heated Catalyst, Evaporative System, Secondary Air System, Air Conditioning (A/C) System, Oxygen (O2) Sensor, Heated O2 Sensor and Exhaust Gas Recirculation (EGR) System.
Hope this helps & good luck 
)
 |
 Oil Service Inspection Reset Tool For BMW X5 Z4 E46 E39  US $9.98
|
 OBD2 Reset Inspection Oil Service Tool for BMW E50 E52 US $4.19
|
 BMW Mini Rover OBD2 Oil Service Inspection Reset Tool US $5.38
|
 Professonial OBD2 Tool PS150 OIL and Service inspection OIL RESET TOOL US $169.99
|
| Powered by phpBay Pro |
E39 Inspection reset
Leave a Reply
You must be logged in to post a comment.