Hardware Screws
Hardware Screws

Metal doorjamb cutout for the dead bolt strike plate doesn't match hardware size or screw holes. Any advice ?
new fire door jamb indent and screw holes doesn't match with new hardware strke plate. we ar getting a small draft so we would like to correct this by adding a plate. Any suggestions ? Door company is not helpful.
we need to find a strike plate that fits the indentation in the metal frame. the one with the hard ware is too small. will company make one with our specs or can we just redrill the metal frame ?
Hard to answer without some additional info. but here goes.
Make sure door is level and square-if door slab is off just a little it will be too low or too high to line up with strike location. If it is off more than just a little you have manufacturing trouble.
I'm not sure if you can even lock your door or not. You may need to get an oversized strike plate, locate it by marking center of knob on jamb side. Then mark new plate location centered on this jamb mark. Mark strike holes, drill and tap holes into frame. Usually 10-24 machine screws . Install strike. And you can also apply weather stripping on frame. Try another commercial door supplier, take a couple of pictures of your door and frame-try to identify brand of door. take this info to another door company-they probably can help out. Take as much info as you can with you- tell them you would be glad to pay them for some help.
![]() |
![]() Furniture Hardware Screw Mount Door Pull Handle Bronze Tone US $5.29
|
![]() H R M65 22 Rifle Hardware Screws US $8.99
|
![]() Silver Tone Screw Mount Door Hardware Pull Handle 58 Length US $5.22
|
![]() LOT VINTAGE ORIGINAL HARDWARE SINGER CABINET HINGES W SCREWS US $20.00
|
![]() LOT VINTAGE SINGER CABINET HARDWARE SCREWS US $15.00
|
![]() Hardware Tool Screw Bolt Nut Extractors Removers Kit 5 Pcs US $13.87
|
![]() 2 Vintage Metal Flower Design Drawer Pulls Double Screw Hardware 3 1 2 Long US $9.96
|
![]() NEW 100x 71624830005 Hardware Screw Hex m3x35 US $19.99
|
![]() NEW 200x 71624830009 Hardware Screw M2X3 US $19.99
|
![]() Slash 4x4 SCREWS TOOLS HARDWARE Set Traxxas 6808 US $.99
|
| Powered by phpBay Pro |
Custom Built Fender Stratocaster
Leave a Reply
You must be logged in to post a comment.


US $5.29







































