Archive for the ‘guitar’ tag
Fender Repair
Fender Repair
When to Choose Paintless Dent Repair
Paintless dent repair is a wonderful solution for many types of vehicle body repairs. It is more affordable than traditional repairs, preserves the value of a vehicle, eliminates the use of environmentally harmful chemicals and solvents in the repair process, and takes much less time to complete. It is covered by most insurance policies and typically comes with a workmanship guarantee. Many paintless dent repair companies will even travel to your home or office and complete the repair while you wait.
There are a number of situations in which paintless dent repair is the better choice over traditional repairs made at a body shop. These scenarios are outlined below.
1) Hail damage. Hail damage can cause a large amount of damage to vehicles located across a wide geographic area. In such cases, body shops can become backed up for months at a time as they become overwhelmed by the sheer volume of repair claims to which they must attend. Paintless dent repair provides an option for quick repair of hail damaged vehicles without the hassles of having to deal with body shops. As hail damage does not usually cause sharp creases in the metal or chip the paint, paintless dent repair is an ideal solution to restore your car to its original finish.
2) Dings. Dings can be caused by a variety of factors, ranging from shopping cart damage to pebbles thrown against your car while driving to dings from the impact of a car door in a parking lot. These types of dings can be very annoying, but fortunately are prime candidates for paintless dent repair. The dings usually occur on the hood of a vehicle (pebble or stone damage) or along the broad side body panels of a vehicle (shopping cart damage and dings from car doors). The broad, relatively flat surfaces of the panels affected by such damage does not require the services of a body shop. In fact, if you were to take your car to a body shop for the repair of this type of damage they would likely use paintless dent repair anyway.
3) Fender benders. More serious dents than those described above can occur in minor collisions with other vehicles or stationary objects. Don’t let the size of the dent discourage you from seeking the assistance of a paintless dent repair professional – it is not the size of the dent which makes a repair a good candidate, it is rather the type of a dent. A broad shallow dent in a body panel can usually be fixed using this method. Even many creases can be repaired in this manner provided the paint is not chipped or otherwise damaged.
While the vast majority of damage that can occur to the body of a vehicle can be repaired using PDR methodology, there are some damages that are not appropriate for this type of service. Some examples of damages not suitable for paintless dent repair would be sharp creases, punctures in the metal, tears in the metal, or in any situation in which the original finish of the vehicle is not intact (such as broken or chipped paint, scratches, and scraping).
If you are in doubt about whether or not your vehicle can benefit from paintless dent repair, it is best to take it to a PDR specialist for an opinion prior to taking it to a body shop. You would be surprised at the many types of vehicle damage that are responsive to PDR
About the Author
David Etienne is the founder of FIX-A-DENT, the premier provider of Professional Paintless Dent Repair services in the United States. Established in 1993, FIX-A-DENT continues being the leader in Hail Damage Repair Austin (PDR), technologies, practices,techniques and Paintless Dent Repair in Austin Texas. For more information, please visit http://www.fixadent.com
How much would it cost to repair a back fender of a 05 mercedes sedan if a screw punctured it making a dent?
I hit a mercedes today going about 4 miles per hour and the screw from my licence plate made a small hole in th back fender and around the hole is a dent which is a little smaller than a coaster. Any idea how much that would cost to repair?
They're going to come back with some ridiculous quotes under the circumstances.It may be best to let the insurance companies work it out if the figure of $500 or more comes up. Good luck with it.
 |
 Fender Rhodes Pickup Repair Service  US $4.13
|
 Bullseye Pick 15 Reach Auto Body Fender Dent Repair US $86.94
|
 Autobody Fender Dent Repair Bullseye Pick 30 Reach US $96.94
|
 1961 1962 ford fender top repair panel usa driver left side right US $50.00
|
 1966 67 CHEVELLE LOWER LH FENDER REPAIR PANEL US $45.00
|
 7 PC AUTO BODY FENDER REPAIR HAMMER AND DOLLY TOOLS US $25.99
|
 194919501951 Ford Front Fender Rust Repair Panels US $89.99
|
| Powered by phpBay Pro |
Fort Myers Bumper Repair and Paint, Fender Repair and Paint, Dent Repair and Paint
Body Fender
Body Fender
Bmw Body Kits Created to Cater for the Tastes of Different People
BMW cars are great looking vehicles that speak of wealth, prestige and status. So how can you improve on these symbols of wealth with the use of BMW body kits? Well while you can use some of the more outlandish looking parts there are also other options. These are the use of rear wings or custom wheels and rims.
You don’t have to go all out and change the entire way your BMW looks. The main fact behind your decision to change the nice conventional look to your status symbol may be the desire to stand out from the rest of the crowd. The best way to achieve this ambition is with the use of BMW body kits.
You can start this metamorphosis by deciding on the first items to change. For instance you may like the look of the sky wing door of the Lamborghini range. These car doors open to the sky instead of the usual factory direct sideways. There are other items in BMW body kits that you can add to give your BMW a brand new look. These will include a possible trunkwing “959”.
At this point you should be aware that most of the body kits parts will have a language of their own. The trunkwing is a term denoting that a new trunk has been made out of fiberglass or the original OEM trunk. This new trunk comes complete with built-in wings of its own.
There are other parts in the BMW body kits range that you can add to your car. For instance you will find some fantastic rear and front lip parts which can be placed on your car. There are also the various side skirts which are attached to the sides of the car to give your BMW a sleek look. On the other hand you might want to have a wide body kit performed on your BMW.
This body kit will in some cases require extensive body work and painting to be done on your car. What is entailed in this type of body work is ground effect fender flares or wide fenders to be attached to your BMW. There are additional 1 /4 panels which need to be attached as well. To help your car cope with the wider fenders you may have to add some wider wheels and tires to your BMW.
Now before you become scared of how your car will look you should know that there are some real nice looking tires that will not spoil the elegant look of your BMW. As with so many different body kits the BMW body kits have been created to cater for the tastes of different people. You will find the addition of these BMW body kits to provide your car with added elegance.
About the Author
Muna wa Wanjiru is a Web Administrator and Has Been Researching and Reporting on Car Kits for Years. For More Information on BMW Body Kits, Visit His Site at BMW Body Kits
|
 Replacement Body Glossy Nitro Alder Sur Green 4 fender stratocaster US $125.00
|
Bullseye Pick 15 Reach Auto Body Fender Dent Repair US $86.94
|
 ATV Polaris Fender Body Cover R S US $.99
|
 Fender 2009 Candy Apple Red Mexican Strat Body ONLY BeautifulMINT US $99.99
|
 Replacement Body Aged Nitro Fin for Fender Telecaster US $208.50
|
 Fender Squier Stratocaster Body w Hardware US $60.00
|
 Surf Green Fender Stratocaster Body US $31.00
|
 1995 Fender Jagstang body PERFECT Kurt Cobain designed 1st issue Japanese LK US $290.00
|
 Fender Squire Bullet Body Blue Loaded US $30.00
|
 Fender Jimmie Vaughan Stratocaster Body Tobacco Burst US $86.00
|
 7PCS FENDER KIT HAMMER DOLLY AUTO BODY REPAIR TOOLS US $29.99
|
 Fender Squier Classic Vibe Jazz bass body loaded project US $149.99
|
 8 Piece Set Butt Welding Clamps 040 Gap MIG TIG Sheetmetal Auto Body Fender US $16.95
|
| Powered by phpBay Pro |
Body & Fender Man
Base Plate
Base Plate
How far is it from Home plate to 1st base in Major League BAseball?
90 feet
|
 Lot 200 Green LEGO Bricks Pieces 3 Raised Baseplates US $5.95
|
 LEGO BASEPLATE 2359px2 ROAD 32 X 32 DOTS 7 STUD CURVE WITH ROCKS AND RUTS US $9.99
|
 7 ASSORTED LEGO BASEPLATES US $9.99
|
 Kawasaki Ninja 500 636 ZX6R ZX7R ZX9R ZX10R BASE PLATES US $9.95
|
 5 LEGO BASEPLATES 16 X 32 DOTES US $9.99
|
 8 ASSORTED GREEN LEGO BASEPLATES US $12.50
|
 FLUO LIGHT 35X 90X STEREO ZOOM MICROSCOPE ARTICULATING ARM POST PLATE BASE US $769.98
|
 378 lot of LEGO BASEPLATES US $8.00
|
 Beaulieu Super 8mm Custom Base plate 15mm rod support US $275.00
|
 Quad II 2 base plate 099p start no reserve US $17.38
|
 Lego Duplo Large Base Plate 14 X 14 Inches 24 x 24 Pegs US $18.00
|
 Yamaha YZ YZ125 G 1980 magneto base plate 3R3 85509 20 genuine NOS US $15.78
|
 LEGO DUPLO LARGE 15X15 BASE BUILDING PLATE US $12.00
|
 Holley Carburetor Base Plate 600 CFM List No1850 US $10.50
|
 Lego Duplo RED BASEPLATE 15 X 15 EUC US $12.99
|
 Kerr Dental Base Plate Wax 5lb US $54.99
|
 Suzuki GSXR 600 750 1000 1100 CARBON BILLET BASE PLATES US $9.95
|
 2011 Topps Chrome Greg McElroy New York Jets Base Printing Plate 1 1 US $12.50
|
 10 SQUARE TRIVET wood MDF mosaic base hot plate DIY unfinished fiber board tile US $10.00
|
| Powered by phpBay Pro |
Fabrication of Shellac Base Plates
Fender Tool
Fender Tool
HELP!!! Anybody know how to fix a bass guitar?
Hey there, i just plugged my Fender Squire P- Bass into my amp, and i'm getting a really nasty, gnarly, roaring white noise coming out the amp.
I tried a different amp= nothing
I tried a different lead= nothing
Can anybody help me out??? Whats wrong with my guitar!!!
If possible, can someone give me directions on how to fix it??? I'm pretty nifty with a screwdriver, seeing as i've repaired a few of my own guitars before, and have every tool you can think of, so Directions on how to fix it would be really helpfull.
Thans alot
It can be several things. First pull the output jack and make sure the wire is still connected. I believe there is only one, but check to see that the ground plug is in the path of the cord when it enters. If that is cool you have to pull the pickgaurd off and check that the connections to the pickups are good and soldered. Other than that all thats left would be the pickup itself, you will ne a voltmeter to check that. Good luck
|
 NEW Eastwood Fender Roller Lip Forming Rolling Tool US $212.50
|
 FENDER MOUNT METAL TOOL BOX SMALL RED US $45.00
|
 REAR FENDER MUDGUARD BOLT ON TOOL BAG ENDURO TRIALS US $18.94
|
 1981 82 HONDA CB900F REAR INNER FENDER AND TOOL BOX US $10.00
|
 Ram Tuff Decal Fender Helmet Tool Box Window Truck Car US $4.99
|
 ACERBIS MOTOCROSS ENDURO REAR FENDER TOOL BAG PACK US $31.58
|
 honda 1982 CB750SC NIGHTHAWK inner fender tool comprt US $14.99
|
 Tools 9726 38 Piece Door and Fender Bit Set US $39.97
|
 1981 Honda CB750 CB 750 K Rear Inner Fender w Tool Box US $7.99
|
 7PCS FENDER KIT HAMMER DOLLY AUTO BODY REPAIR TOOLS US $29.99
|
 Large Head Hammer For Auto Body Shop Fender Tool US $13.99
|
 1980 HONDA CB750 REAR INNER FENDER TOOL BOX US $15.00
|
 Rear Fender with Tool Box Suzuki GS550E GS 550 E Motorcycle US $15.00
|
 Honda CB CB750 CB750F Sport Rear Fender Tool Box 1978 US $36.00
|
 XR500 XR600 Rear Fender Tool Bag Tool Pouch Fender Bag US $45.00
|
 03 04 KAWASAKI NINJA ZX6R ZX6 BATTERY TOOL TRAY FENDER US $5.60
|
 7PCS FENDER KIT HAMMER DOLLY AUTO BODY REPAIR TOOLS US $30.99
|
 AUTO BODY FENDER REPAIR HAMMER AND DOLLY TOOL 7 PC US $26.89
|
 1976 Honda MR175 Sub Fender with Tool Box US $79.00
|
| Powered by phpBay Pro |
Axiom Gear - mini pump, mud fender, multi-tool
Rod Adjusting
Rod Adjusting
Little Known Features Of Guitar Designs - What On Earth Are Truss Rods?
If you talk to a guitar enthusiast it may well be that they have heard of truss rods, and may even be capable of showing you where their truss rod is to be found, but to the average person or beginner, most people would be hard pressed to know whether their guitar even had a truss rod. So what is this feature, and what does it do? First of all, if we think about the problem that may be caused by not having a truss rod, then we can see where its role fits in.
A guitar has a long neck, the fret board, up which runt eh strings. It is this long board which is used by the secondary hand to press the strings down in an arrangement which will create the chord to be played. Typically most guitars are made of wood, and so this fret board is a long, slender wooden board. Not only that, but the fret board is under a great deal of pressure, since the strings are pulled very tightly indeed. In fact, on many guitars the strings are made from steel, and tightened quite considerably, putting the fret board under a great deal of pressure. Wood is a natural product, obviously, and so therefore prone to the same problems that all natural products suffer from, and that is aging and deterioration.
Certainly guitars, as with most wooden products, are treated carefully with sealants and varnishes to help nourish and protect the guitar for a good long life. However, with most wooden products the problem of slight warping may only lend character, for a guitar, and warping spells disaster, since the design and measurements of a guitar are very exact, to ensure that the notes are crisp, clear and accurate. Because of the length of the fret board, any warping or bending could cause the notes played to be altered quite noticeably, and so these would render the guitar useless. Not only that, but slight warping can lead to cracking, and with so much pressure on the fret board already from the strings, this would lead inevitably to breakage of the fret board completely. The truss rod, therefore, is a strong metal rod which runs up through the fret board from one end to the other, and can be tightened usually using an Allan key at the top.
This metal rod acts a little like a backbone for the fret board, meaning that aging, humidity and any other causes of natural deterioration will not result in warping or disfigurement of the fret board, helping to ensure that the notes still sound clear and accurate, and the life of the guitar is lengthened. Most classical guitars only use nylon strings, and so there is far less pressure on the fret board. For this reason, you may not always find truss rods included, but where you do find them, they can sometimes come with an extra feature which allows an alteration in the tone of the notes played to be heard. By adjusting the truss rod by turning it either clockwise or antic clockwise, the fret board can be adjusted to an angle either side of the normal centre. This can adjust the distance of the strings from the fret board, allowing a different playing method to be adopted, as well as altering the tone very slightly.
Those truss rods that allow movement in both directions are known as double truss systems. In some cases the truss rod can only be accessed by completely removing the headstock of the guitar, which is the part at the very top of the fret board, and so altering the style of the guitar is something done only very rarely.
About the Author
Victor Epand is an expert consultant for electric guitars, steel string guitars, double truss guitars. You can find the best marketplace at these sites for electric guitars, steel string guitars, double truss guitars, sheet music, guitar tab, and home theater audio.
Where can I learn for free how to adjust the truss rod on my Fender Stratocaster guitar?
See if this helps you
http://www.athensmusician.net/archive/2001-05-01_geneimbody1.shtml
|
 Pneumatic AST7802 Tie Rod Pitman Arm Adjusting Tool Set US $52.09
|
 JEEP WRANGLER TJ 97 06 NEW TIE ROD ADJUSTING SLEEVE 1805603 US $28.39
|
 MOOG ES3422S Tie Rod End Adjusting Sleeve US $13.43
|
 MOOG DS1452S Tie Rod End Adjusting Sleeve US $27.56
|
 MOOG ES2004S Tie Rod End Adjusting Sleeve US $10.05
|
 MAS INDUSTRIES AS81003 Tie Rod End Adjusting Sleeve US $50.43
|
 ACDELCO 45A6000 Tie Rod End Adjusting Sleeve US $13.93
|
 CEN FFS020 Adjusting Rods MS US $4.79
|
 MOOG ES2032S Tie Rod End Adjusting Sleeve US $9.25
|
 MOOG ES2058S Tie Rod End Adjusting Sleeve US $14.27
|
 MOOG ES2146S Tie Rod End Adjusting Sleeve US $35.43
|
 MOOG ES2323S Tie Rod End Adjusting Sleeve US $11.40
|
 MOOG ES3065S Tie Rod End Adjusting Sleeve US $21.88
|
| Powered by phpBay Pro |
Gretsch Guitars - Tech Tips - Truss Rod Adjustment
Rolling Under
Rolling Under
Will rolling office chair scratch Pergo floor?
Do I need to put anything under my rolling office chair or is it ok on the Pergo?
Your question will be answered on this Pergo floors consumer site:
http://www.europe.pergo.com/Consumer/Templates/FAQ/CS_FAQ.asp
Hope
|
 Rolls Royce Bentley Under the Seat Heater US $75.00
|
 ROLLING STONES LP UNDER COVER WITH INNER INSERT US $7.88
|
 Black Under Seat Rolling Carry On Luggage Travel Bag Ballistic nylon case US $19.99
|
 GI JOE ROLLING THUNDER VEHILCE PART BAY COVER DOOR FROM UNDER TURRET 1988 US $7.50
|
 ROLLING STONES UNDER REVIEW 1962 1966 NEW DVD US $12.36
|
 UG 49603 Color On Under The Sea Coloring Roll US $28.18
|
 Rolling Stones Under Cover 79 01201 NM LP 1983 W Insert US $29.99
|
| Powered by phpBay Pro |
The Rolling Stones - Under My Thumb Live in Arizona
Fender Cover
Fender Cover
Why Foam-filled Fenders?
Fenders are an essential part of any dock or harbor facility. Docking a ship is an imprecise matter, and fenders must be in place to keep ships from being damaged by bumping, scraping or crashing into docks. By the same token, the docks themselves must be protected from damage by ships. Fenders also come into play to prevent damage from ships coming into contact with each other. Every vessel from a pleasure craft to a fishing boat to a supertanker needs fenders; every structure from a dock to a bridge to an oil rig does, as well.
Historically, fenders were woven together from rope, in a variety of knots and patterns still known and used today by many traditionalists. They would typically be covered with a layer of old tires as a buffer, then used as a fenderboard along a dock piling. Like everything else, fenders have been improved over the years.
For years, the inflatable Yokohama fender was the state-of-the-art fendering system. Yokohama fenders, however, require air pressure and safety valves that need to be maintained. Inflatable fenders also have a “recoil” that will cause ships to “bounce” in the other direction after contact. Thousands of inflatable Yokohama fenders are still in use worldwide, but the next logical progression in fender and mooring technology is the foam-filled fender. Constructed with a tough outer skin and heat-laminated layers of foam at their core, foam-filled fenders offer the following advantages:
-
Softer berthing. Unlike the “bounce” of inflatable Yokohama fenders, a foam-filled fender rebounds more slowly, rather than jolting the ship and its passengers as it buckles and rebounds.
-
All tide mooring. Foam-filled fenders, by design, make mooring easier regardless of tidal phase or conditions.
-
Hull conforming. The design of the foam core in a foam-filled fender gives great resilience and the ability to conform to a vessel’s contours. The result is a more even distribution of energies over a greater area, and much lower hull pressures.
-
Unsinkable. Like a fishing bobber, the foam core of a foam-filled fender makes it impossible to sink.
-
Durable. Foam-filled fenders are available in different rubber compounds like neoprene, EPDM, butyl and polyurethane. The result is a product that is resistant to saltwater, ultraviolet rays, ozone aging, dry rot and extremes of temperature and weather, making it suitable for use in any environment worldwide.
About the Author
http://www.anchormarinehouston.com/ - Anchor Marine and Industrial Supply: the leading provider of shipping and marina equipment, including anchors, fenders, chains, dock, and towing equipment.
We are the exclusive U.S. Dealer of Yokohama fenders and provide both new and used parts to the oil and gas industry worldwide.
Why is oil accumulating inside my air cleaner cover?
I have clean oil inside my air cleaner, what gives? There's also a film of oil on the right inner fender where the intake for the air cleaner cover points like is belching oil out of it. The engine is a stock 350ci V8 in a 1973 Monte Carlo.
Your crankcase-breather lets excess pressure vent into the air-cleaner, where the oil vapour should be sucked through the carb and be burnt by the engine. If you are accumulating oil there, it points to an excess of blow-by pressure, and it may be time for a new set of rings (Dude, if that engine is original, it's 37 years old!) or maybe a re-bore and larger set of pistons.
Please, email me a photo of this fine beast? I live in the UK, but I love chunky American cars! nelkyopel@yahoo.co.uk
Thanks!
|
 VINTAGE MECHANICS FENDER COVER STP QUAKER STATE VALVOLINE PRESTONE II mancave US $22.00
|
ATV Polaris Fender Body Cover R S US $.99
|
 1960s 70s Fender Dual showman reverb cabinet cover US $39.00
|
 CUSTOM CHROME LEFT SIDE REAR FENDER BRACKET COVER HARLEY DYNA GLIDE US $4.00
|
 FENDER STRATOCASTER BRIDGE COVER US $14.99
|
 NOS FENDER STRATOCASTER BRIDGE COVER US $14.99
|
 Top Quality Fender Cover 27x35 NEW US $5.95
|
 vintage fender cover US $50.00
|
 Fender Tremolo Cover Parchment with 6 Mounting Screws Stratocaster US $6.99
|
 Fender Tremolo Cover Mint 1 ply Stratocaster Vintage Type US $4.00
|
 USA Fender Stratocaster Strat TREMOLO BACK COVER Parch US $.99
|
 Trem Cover for Fender Strat Red TortoiseGuitar Parts US $6.95
|
 LOT OF 2 Top Quality Fender Cover 27x35 NEW US $11.90
|
 USA Fender Stratocaster Strat TREMOLO BACK COVER Guitar US $.99
|
 john deere flywheel cover fits k 181 round fender US $29.99
|
 FENDER JAZZ BASS GUITAR PICKUP COVER BRIDGE COVER 1968 US $79.95
|
 BLACK COTTON FENDER COVER 36x60 MADE IN THE USA US $5.99
|
 Chevrolet Racing Black Fender Gripper Fender Cover US $21.00
|
 1 35 KMY PE Tiger I early late ver fendersexhaust cover 235004 x2 sets US $12.00
|
 Ford Racing Fender Cover NEW US $10.50
|
 White Back Plate Tremolo Cover for Fender Stratocasters New US $1.46
|
 CaseScreen Protector for T Mobile MyTouch 3G Fender A Leather Flip Pouch Cover US $7.61
|
 COTTON NAVY BLUE FENDER COVER 35x59 MADE IN THE USA US $5.99
|
 Fender strut covers US $15.00
|
 HASTINGS PISTON Advertising Fender Protection Cover NICE GRAPHICS US $50.00
|
| Powered by phpBay Pro |
Alchemy - Philip Sayce (Cover) with Fender Stratocaster "Blackie" & Blues Jr. Amp
Feeler Gauge
Feeler Gauge
What can I use for a substitute feeler gauge?
I need to set the gap in my points and forgot to get a feeler gauge blade. I need to gap them at 0.16. Can anyone suggest a substitute that is 0.16? Matchbook cover or ???
Pull tab on beer can or pop can, I think most are 0.15
|
 Lisle Feeler Gauge Mini Blade Type 010 To 035In LIS68000 US $3.07
|
 STARRETT 666 9 009 FEELER GAUGE STOCK 25 LONG NEW MADE IN USA US $20.00
|
 Lisle 68050 Valve Tappet Feeler Gauge US $3.69
|
 Lisle Feeler Gauge Blade Type 002 To 025In LIS67950 US $4.13
|
 Lisle 68100 Deluxe Feeler Gauge US $6.39
|
 Lisle Feeler Gauge Brass Blade Type 006 To 016 LIS68200 US $2.35
|
 Lisle Feeler Gauge Blade Type 004 To 027In LIS68150 US $8.53
|
 Brand New Dual Aluminum Feeler Gauge Holder US $34.99
|
 JEGS 80502 11 Blade Premium Feeler Gauge Kit US $18.99
|
 Lisle 68200 Brass Feeler Gauge US $2.95
|
 Feeler Gage Gauge Stock 030 BRAND NEW 25 Feet Long US $11.99
|
 LISLE MINI FEELER GAUGE 16 STEEL BALDE 68000 US $7.19
|
 Proto Feeler Gauge Mechanics Tool Inches Metric 000AA US $13.95
|
 KD Tools 2062 Mini Feeler Gauge US $3.39
|
 Siegen Feeler Gauge 13 Blade Metric S0517 US $15.09
|
 DRAPER 32 BLADE DUAL READING COMB FEELER GAUGE 19613 US $24.66
|
 Lisle Tools 68000 Mini Feeler Gauge US $3.99
|
 CK CK T3525M 413 Feeler Gauge Metric 13 Blade US $6.30
|
 LUCAS POINTS FEELER GAUGE SCREWDRIVER JAGUAR MG HEALEY TOOL KIT US $35.00
|
 CRF250 Hotcam valve shim lash adjustment kit Taper feeler gauge CRF250R US $79.95
|
 Lisle 68150 Go No Go Feeler Gauge US $8.49
|
 9 BLADE FEELER GAUGE METRIC IMPERIAL POINTS TAPPETS US $2.61
|
 7 BLADE METRIC MECHANICS FEELER GAUGE BRAND NEW US $6.30
|
 NEW STARRETT 666 4 THICKNESS GAUGE FEELER STOCK 25 US $24.99
|
 NEW STARRETT 666 7 THICKNESS GAUGE FEELER STOCK 25 US $24.99
|
 NEW STARRETT 666 11 THICKNESS GAUGE FEELER STOCK 25 US $24.99
|
 NEW STARRETT 666 13 THICKNESS GAUGE FEELER STOCK 25 US $24.99
|
 NEW Feeler Gauge Set Imperial AF MM 26 Blades Offset US $9.64
|
 LISLE TOOLS 68200 BRASS FEELER GAUGE US $3.19
|
 PERFORMANCE TOOL 22 BLADE FEELER THICKNESS GAUGE W80524 US $6.69
|
 ELORA German Thin Blade Metric Feeler Gauge Set US $24.99
|
 KASTAR HAND TOOLS 25 BLADE 12 FEELER GAUGE 12025 US $25.49
|
 Universal Overhead Valve Feeler Gauge by Cal Van Tools Made In USA US $7.99
|
 Nitro Race Hemi Billet Feeler Gauge Handle US $14.95
|
 DRAPER 10 BLADE METRIC FEELER GAUGE SET US $6.65
|
 STAHLWILLE Germany 22 Blade Standard Feeler Gauge US $23.33
|
 DRAPER 18 BLADE METRIC IMPERIAL FEELER GAUGE SET US $9.53
|
| Powered by phpBay Pro |
Auto Repair Honda Valve Adjustment